Jump to content

YaM-5 box mine

From Wikipedia, the free encyclopedia
A diagram of a YaM-5 anti-tank mine from a US army publication. 1 - pressure block, 2 - staple, 3 - wooden peg or nail, 4 - striker-retaining pin, 5 - overlapping edge of lid, 6 - paper wrapped explosive, 7 - fuze holder block, 8 - fuze well, 9 - booster charge

The YaM-5 (anti-tank mine 5 kilograms) was a Soviet anti-tank blast mine with a wooden case. The mine was widely used during Great Patriotic War. Wood was chosen as primary material for its availability, cheapness and ease of handling; for example, in 1942, several thousand cases were produced at Tuymen Plywood Factory by patriotic young volunteers as an after-school activity. Various types of wood were used.

The mine consists of a rectangular wooden box with a hinged lid that overlaps the front of the mine. A slot in the hinged lid's side through which an MUV pull fuse is placed. A wooden pressure bar is sometimes used on the edge of the lid above the slot. A nail is placed horizontally through the loop of the MUV fuse's striker retaining pin and two loops on the bottom of the lid's slot.

A YaM-10 was also produced; it was a scaled-up version of the YaM-5.

The wooden case was normally painted olive green, gray or white.

The mine was frequently used with anti-handling devices.

Downward pressure on the lid forced the nail downwards; withdrawing the striker retaining pin detonated the mine.

Specifications

[edit]
YaM-5 YaM-5K YaM-5M YaM-5U YaM-10
Length 19.5 inches 23.6 inches 19.5 inches 19.75 inches
Width 7.75 inches 6.9 inches 7.6 inches 7.6 inches
Height 3.5 inches 6.4 inches 6.4 inches 6.4 inches
Weight 14 lb 16 lb 16 lb 14 lb 22 to 27 lb
Explosive content 11 lb 16 to 22 lb
Operating pressure 300 lb
Notes No pressure
block on lid
Long pressure
block
Short pressure
block
Long pressure
block
Larger version
of the mine

References

[edit]
  • TM 5-223, Foreign Mine Warfare Equipment
  • Pamphlet No. 30-50-1, Handbook on the Soviet Army
[edit]

YaM-5 box mine at ORDATA